Thermaltake Toughpower PF3 ATX 3.0 850W 80 Plus Platinum Full Modular Power Supply

Thermaltake Toughpower PF3 ATX 3.0 850W 80 Plus Platinum Full Modular Power SupplyFeatureKeep your rig up and running with the Toughpower PF3 850W 80 PLUS Platinum Power Supply from Thermaltake. Featuring a standard ATX form factor and Intel ATX Version 3.0 compliance, this 850W PSU utilizes a single 12V rail and 120mm cooling fan. Furthermore, it boasts an 80 PLUS efficiency rating and delivers 60% low-load efficiency. The Thermaltake Toughpower PF3 850W 80 PLUS Platinum Power Supply has a mean time between failures (MTBF) of 100,000 hours, minimum.Power Up the Next Generation HardwareThe Toughpower PF3 850W 80 PLUS Platinum Power Supply is designed to meet ATX 3.0 standards, and it also comes with one PCIe Gen 5.0 (12VHPWR) connector to support modern graphics cards.Fully Compatible with Intel ATX 3.0 StandardsThe Smart PF3 is fully compatible with Intel ATX 3.0 specifications and it supports up to 200% power excursion, reaches 70% low load efficiency, and complies with required power supply timing standards.PCIe Gen 5.0 ReadyThe PSU comes with a 16-pin connector to offer powerful and stable performance allowing the PSU to natively run next-generation GPUs. The wattage marked on the 12VHPWR’s connector is the recommended Intel wattage. The native 16-pin (12VHPWR) PCIe connector of the PF3 850W can deliver up to 450W for PCIe 5.0 graphics cards.Complies with the Latest Graphics CardsAs the power consumption of graphics cards increase, so has their demand for power. The PF3 Platinum series is designed to support NVIDIA and AMD graphics cards with different connection types.Quiet 120mm Cooling FanFeaturing a 120mm fluid dynamic bearing fan to create the perfect balance between silence and superior cooling, and its Smart Zero fan will adjust the fan speed and minimizes undesired noise.High Amperage Single 12V Rail & DC to DC DesignThe powerful single 12V rail can properly deliver the power you need for the best compatibility. The use of LLC and DC to DC circuit design provides very stable operation and enhanced voltage regulation.Industrial Grade ProtectionTo protect the hardware, the Smart BM3 is built with industry grade protections:OCP (Over Current Protection)OVP (Over Voltage Protection)UVP (Under Voltage Protection)OPP (Over Power Protection)SCP (Short Circuit Protection)OTP (Over Temperature Protection)Semi Modular Flat Cable DesignSoft low-profile black cables make installation easy while powering the system at optimal voltages. It features the following connections:A main 24-pin connectorTwo 4 4-pin ATX 12V connectorsFour 6 2-pin connectorsOne PCIe 12 4-pin 450W connector12 SATA 5-pin connectorsFour 4-pin peripheral connectorsOne FDD adapterRegulation and Low-Noise FeaturesThe build quality features low ripple noise that is lower than 30mV on 12V, 5V, or 3.3V from 0% to 100% load to ensure a stable operation and allow your performance-critical components to function reliably for longer. The PSU voltage regulation is tighter than Intel’s standard 5%,-7% for major rails and ±10% for -12V, and is set to no more than ±2% for major rails, providing steady clean power through exceptional voltage stability.During a power interruption, your computer might shut down or reboot, so the PF3 series is designed to deliver at least 17ms at 100% workload, without system reboot or resetting.80 Plus Platinum Certified Intel C6/C7 States ReadyIts 80 Plus Platinum certification means the Toughpower PF3 converts power efficiently, resulting in lower power loss and heat buildup inside the power supply.80 Plus Platinum certification means the Toughpower PF3 converts power efficiently, resulting in lower power loss and heat buildup inside the power supply.